WA2-F Fluorescent Floodlyte

HOUSING: Die-cast aluminum. Integral cast hinge with stainless steel pins is concealed internally and allows easy access for relamping. Aluminum die-cast. Locking teeth provide adjustment by tightening one (1) stainless steel recessed screw. ½-14" NPS stainless steel threaded nipple provides secure mounting. One-piece die-cast aluminum. Hinged doorframe is secured to the housing by four (4) stainless steel recessed captive Phillips-head screws. One piece molded silicone gasket between the housing and doorframe provides a long-lasting weather-tight seal. FINISH: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. For larger projects where a custom color is required, contact the factory for more information. OPTICAL ASSEMBLY: Formed from highly reflective Hammertone aluminum and semi-specular kick plates. Reflector assembly is secured to the housing with four (4) stainless steel screws. 1/8" tempered silicone glass. One-piece molded silicone gasket and spring clips. Aiming up to a 60° back tilt. Fixtures used outdoors must be protected from rain and sprinklers if aimed downward. ELECTRICAL ASSEMBLY: Mounted directly onto the reflector assembly and are UL recognized for appropriate lamps. Mounted directly to the housing and pre-wired with leads extending from the swivel arm. All electrical components are UL, cUL recognized. BALLAST: Integral core and coil, NPF, Class B, starting temperature 25° F. WARRANTY: Three-year limited warranty. CERTIFICATIONS: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. Height : 9" (229mm) Depth: 7 1/8" (181mm) Width: Short: 17 3/4" Width: Medium: 30 3/4" (781mm) Width: Long: 55 1/2" (1410mm) Max. Weight: 9 lb.