I4 Composite HID Ingroundlyte

HOUSING: Single-piece compression molded fiberglass reinforced polyestercomposite. Trim ring is a compression molded polyester. Rock guard usedfor directional glare control made of compression molded polyester.Single-piece molded silicone U-channel gasket. FINISH: Composite is textured, pressure formed, molded-in-color. OPTICAL ASSEMBLY: 2,600-pound live-load rated, standard walk-over lens.Clear convex,tempered soda-lime glass for high impact resistance.Lamps have 15°articulation either side of vertical and 358° rotation withoutinterruption of beam pattern. PAR/R and flourescent are not aimable.Optional specular aluminum spun reflector available for E17 spot (15°)or flood (70°) beam pattern. LAMPING: Lamp is not included. 150W maximum MH G12 base: T6 150W maximum MH and HPS medium base E17, PAR38, or R40 lamps. ELECTRICAL ASSEMBLY: Bi-pin socket type (G12) for T6 lamps, with 250° Celsius high temperature teflon coated wire leads. 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact. BALLAST: T6 Metal Halide lamp uses an electronic ballast. Allother HID ballasts are core and coil. Ballasts are factory pre-wiredand tested, and mounted to a removable tray with quick-disconnect foreasy installation. WARRANTY: Ten-year limited warranty. CERTIFICATIONS: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. ADA Compliant when used in concrete and flush mounted with CP4 or CPS4. Height: 14" (354mm) Width: 12 1/4" (310mm) Max. Weight: 15.28 lb.