RRF1I Mini Round Steplyte

HOUSING: Die-cast aluminum. Gasketing is silicone. Internal wiring compartment contains two (2) ½" NPT conduit taps in the bottom and one (1) ½" NPT conduit tap in both sides. A removable plug will be provided for one (1) tap. Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications. Fasteners are 300 series stainless steel. FINISH: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. OPTICAL ASSEMBLY: UV stabilized injection molded clear polycarbonate bubble lens, allowing positioning of lamp to project out of the wall enabling and efficient wide distribution. Reflector is formed from highly reflective aluminum. LAMPING: 15W maximum T7 lamp. Lamp is not included. Lower wattage lamps are acceptable. ELECTRICAL ASSEMBLY: Fixture is pre-wired with 18 AWG black, white, and ground wires. Double contact bayonet socket type (BA15d). WARRANTY: Three-year limited warranty. CERTIFICATIONS: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. ADA Compliant when used in indoor and outdoor wall applications. Height: 4" (102mm) Depth: 2" (51mm) Max. Weight: 1.35 lb. Note:- 1:- Insulation protector is required for installations in drywall, plaster, wood or other non-masonry materials with the exception of fluorescent lamping and must be ordered as an option - add the suffix "P" to the catalog number.