RB71 Bollards and beacons

HOUSING: Die-cast zinc. Removable head . Easy access to lamp. 6” dia. extruded aluminum with a wall thickness of 0.125” . A weatherproof ballast assembly isolates the ballast from water and heat for longer life. All non-ferrous fasteners prevent corrosion and ensure longer life. FINISH: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications. For larger projects where a custom color is required, contact the factory for more information. OPTICAL ASSEMBLY: Asymmetric. Cylindrical tempered glass refractor lens. Integral shield limits light distribution to a 180° pattern. LAMPING: Incandescent Medium Base A19. 26W CFL (GX24Q-3). 32W CFL (GX24Q-3). 42W CFL (GX24Q-4). 70W maximum T6 MH. MH and HPS Medium base: E17. Lamp is not included. ELECTRICAL ASSEMBLY: Key-slotted Ballast Assembly is mounted to an aluminum plate, which is mounted inside the base. Quick disconnects for easy installation and removal. 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact. 26W Fluorescent socket is a GX24Q-3 base. 32W Fluorescent socket is a GX24Q-3 base. 42W Fluorescent socket is a GX24Q-4 base. Bi-pin socket type (G12) for T6 lamps, with 250° Celsius high temperature teflon coated wire leads. BALLAST: T6 Metal Halide lamp uses an electronic ballast. All other HID ballasts are core and coil. Ballasts are factory pre-wired and tested, and mounted to a removable tray with quick-disconnect for easy installation. Fluorescent ballast is electronic. Ballast is capable of starting at 0° F or -18° C. Ballast is factory wired and tested. INSTALLATION & MOUNTING: Internal cast aluminum base plate is secured to anchor foundation by three (3) 3/8-16 x 8" galvanized steel bolts and stainless steel nuts in a 3" bolt circle. (Use factory supplied template.). A twist-lock action mates the base plate casting with lower bollard casting, which is welded to the bottom of the bollard extrusion. One set screw is used to secure the bollard to the base plate. WARRANTY: Three-year limited warranty. CERTIFICATIONS: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. Height : 35" (89cm) Width: 6 11/16" (17cm) Bolt Circle: 3" (8cm) Anchor Rods: Internal. (3) 3/8" dia. x 8" long (1cm x 20cm) Base Diameter: 6" (15cm) Max. Weight: 22 lbs Voltage E 120V F 208V G 240V H 277V K 347V Note : *1 Available in 120V (E) only. *2 Not available in 347V (K).