I25 - Composite Fluorescent Ingroundlyte

The revolutionary i2.5 composite inground provides optimum performancein a small aperture luminaire. Patented design elements including ahinged lens ring, potted factory seal, cool lens option and only 2screws that do not require a torque wrench - the i2.5 reinforcesHADCO's position as the leader in landscape lighting. HOUSING: Single-piece compression molded fiberglass reinforced polyestercomposite. Factory pressure tested to ensure water will not wick orleak through. Separate sealed compartments provide isolation betweenfield wiring, optics, and ballast (MH and CFL). Potted factory sealwith anti-wicking wiring between grade-level junction box and housing.Hinged lens ring with captive lens and fasteners. Only 2 fastenersrequired to secure lens ring. Fasteners are 300 series stainless steelto prevent corrosion and ensure longer life. Consult the factory fortamper resistant screws (hex head) for the lens ring, junction boxcover, and external accessories. Easy access to lamp. UL Listedsilicone filled wire nuts provided - no encapsulant or conduit sealrequired. Two (2) 3/4" NPT threaded conduit inlets in bottom ofjunction box. Gaskets for lens and ballast assembly are single-piecemolded 100% silicone. Gasket for junction box cover is single-piecediecut neoprene. Trim ring is natural cast bronze or cast stainlesssteel. Rock guard made of natural cast bronze or cast stainlesssteel. Half dome field adjustable for glare control, made of naturalcast bronze or cast stainless steel. FINISH: Composite is pressure formed, molded-in color. Natural Brass has satin matte finish. Stainless Steel has satin matte finish. OPTICAL ASSEMBLY: Sealed optical chamber. Aiming 15° either side of vertical and full360° rotation. Angle degree marks for precise vertical aiming withtool-less LOC-AIM®. Handle enables easy tool-less removal of opticalassembly for hot aiming and re-lamping, simply press-fit back intoplace. Clear convex, tempered borosilicate glass lens for high impactresistance. 3,000-pound live-load rated, drive-over lens. Highperformance aluminum reflector for optimum symmetrical light output. Reflectors for CFL are flood beam pattern. LAMPING: 26W CFL (GX24Q-3). 32W CFL (GX24Q-3). 42W CFL (GX24Q-4). Lamp is not included. ELECTRICAL ASSEMBLY: Key-slotted Ballast Assembly with Quick Disconnects mounted to cast aluminum bracket for easy maintenance. 42W Fluorescent socket is a GX24Q-4 base. (Will also accept 26W and 32W PLT lamps). BALLAST: All fluorescent ballasts are Smart Select™ universalelectronic that automatically detect 120-277 volts, 50/60 Hz and areregulated with power factors better than 90% (HPF). Ballast provides+/- 5% lamp power regulation with +/- 10% input voltage regulation,sound rated "A", thermally protected, internally fused, output is shortcircuit protected, no PCBs. Ballast is factory pre-wired and tested.Ballast is capable of starting at 0° F or -18°C. CERTIFICATIONS: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. ADA compliant when used in concrete and flush mounted with CPS25. WARRANTY: Ten-year limited warranty. IP RATING: IP66/68: Dust-tight and dual rated - sealed against direct jets ofwater and against temporary immersion at a depth greater than 1 meter(3.28 feet). Notes:- *1:- All CFL electronic ballasts are universal voltage 120-277VAC 50/60Hz and will operate 26w, 32w or 42w lamps. *2:- Universal CFL socket will accept 26w & 32w GX24q-3 and 42w GX24q-4 lamps.