I25 Composite Incandescent Ingroundlyte

DESCRIPTION: The revolutionary i2.5 composite inground provides optimum performancein a small aperture luminaire. Patented design elements including ahinged lens ring, potted factory seal, cool lens option and only 2screws that do not require a torque wrench - the i2.5 reinforcesHADCO's position as the leader in landscape lighting. SPECIFICATIONS: HOUSING: Single-piece compression molded fiberglass reinforced polyestercomposite. Factory pressure tested to ensure water will not wick orleak through. Separate sealed compartments provide isolation betweenfield wiring, optics, and ballast (MH and CFL). Potted factory sealwith anti-wicking wiring between grade-level junction box and housing. Hinged lens ring with captive lens and fasteners. Only 2 fastenersrequired to secure lens ring. Fasteners are 300 series stainless steelto prevent corrosion and ensure longer life. Consult the factory fortamper resistant screws (hex head) for the lens ring, junction boxcover, and external accessories. Easy access to lamp. UL Listedsilicone filled wire nuts provided - no encapsulant or conduit sealrequired. Two (2) 3/4" NPT threaded conduit inlets in bottom ofjunction box. Gaskets for lens and ballast assembly are single-piecemolded 100% silicone. Gasket for junction box cover is single-piecediecut neoprene. Trim ring is natural cast bronze or cast stainlesssteel. Rock guard made of natural cast bronze or cast stainlesssteel. Half dome field adjustable for glare control, made of naturalcast bronze or cast stainless steel. FINISH: Composite is pressure formed, molded-in color. Natural Brass has satin matte finish. Stainless Steel has satin matte finish. OPTICAL ASSEMBLY: Sealed optical chamber. Aiming 15° either side of vertical and full360° rotation. Angle degree marks for precise vertical aiming withtool-less LOC-AIM®. Handle enables easy tool-less removal of opticalassembly for hot aiming and re-lamping, simply press-fit back intoplace. 3,000-pound live-load rated, drive-over lens. Clear convex,tempered borosilicate glass lens for high impact resistance. LAMPING: 100W maximum PAR30/R30 medium base lamp. Lower wattage lamps are acceptable. Lamp is not included. ELECTRICAL ASSEMBLY: 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact. CERTIFICATIONS: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. ADA compliant when used in concrete and flush mounted with CPS25. WARRANTY: Ten-year limited warranty. IP RATING: IP66/68: Dust-tight and dual rated - sealed against direct jets ofwater and against temporary immersion at a depth greater than 1 meter(3.28 feet).