EWB4 Landscape Steplyte

HOUSING: Fasteners are 300 series stainless steel. Semi-recessed water tight die-cast aluminum with polycarbonate lens. Hinges allow for easy re-lamping. Gasketing is silicone. One (1) ½" NPT conduit tap on the back, two (2) ¾" NPT taps on the bottom and one (1) ¾" NPT tap on each side for easy through-wiring. FINISH: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications. OPTICAL ASSEMBLY: Specular aluminum formed reflector. U.V. stabilized, clear polycarbonate lens. ELECTRICAL ASSEMBLY: Bi-pin socket type (G12) for T6 lamps, with 250° Celsius high temperature teflon coated wire leads. 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact. BALLAST: HID ballasts are HPF core and coil, factory wired and tested, mounted to a key-slotted removable tray with quick disconnect for easy installation. Ballasts shall provide +/-5% lamp power regulation with +/-10% input voltage regulation. Fluorescent ballast is electronic (-20°F cold weather start). WARRANTY: Three-year limited warranty. CERTIFICATIONS: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. ADA Compliant when used in indoor and outdoor wall applications. Height: 12" (305mm) Width: 12" (305mm) Depth: 5 13/32" (137mm) Max. Weight: 4 lbs. Note:- *1:- Insulation protector is required for installations in drywall, plaster, wood or other non-masonry materials with the exception of fluorescent lamping and must be ordered as an option - add the suffix "P" to the catalog number. Available in 120/277v only. *2:- Available in 50, 70, 100 HPS and 70, 100 MH only. *3:- 120/277 volt only *4:- 120/277/347 volt only *5:- 120 volt only