DW1 Bollards and Beacons

HOUSING: Die cast brass upper housing. Single-piece compression molded fiberglass reinforced polyester composite lower housing. Gasketing is silicone. Fasteners are 300 series stainless steel. Two (2) ½" conduit inlets at bottom. Note: Watertight connectors and potting compound (by others) must be used to maintain a watertight seal at conduit entry points. FINISH: Composite is pressure formed, molded-in color. Natural Brass (N) is as-cast and tumble polished. OPTICAL ASSEMBLY: Frosted borosilicate glass. LAMPING: 20W maximum T3 bi-pin lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. ELECTRICAL ASSEMBLY: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 120VAC, 60Hz input to step-down transformer. 12VAC output to fixture, for use with low voltage lamps. Fixture is pre-wired with 18 AWG black, white, and ground wires. WARRANTY: Lifetime limited warranty. CERTIFICATIONS: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. Height : 8 3/16" (224mm) Width: 4 15/16" (126mm) Max. Weight: 5.5 lb.